Post processor error messages
Cadfil Help contents Cadfil.com Home
POST PROCESSOR - LICENSE NUMBER nnnnnn, NOT CONFIGURED
This error occurs when that datakey has not been found. Possible reasons for this error are discussed in the sections relating to the software installation.
ERROR READING MANDREL DATA
This error is generated when there is a data format error in the mandrel file that is being read or that the end of the file has been reached unexpectedly. The format of the mandrel file can be found in the appropriate
MANDREL FILE NOT FOUND
This error occurs when the mandrel file name that has been read from the payout file cannot be found in the current directory
ERROR OPENING MANDREL FILE
Unexpected error when opening the mandrel file, contact CCL
ERROR OPENING PAYOUT FILE
Unexpected error when opening the payout path file, contact CCL
ERROR OPENING PROGRAM FILE
This error message indicates that there was an error opening the file for the NC data. The most probable cause being that this disk is full.
ERROR READING PAYOUT FILE LINE NUMBER nn
This error is generated when there is a data format error in the payout file that is being read. This error was first detected on line number nn. This will usually indicate that there is a data format error on that particular line or that the end of the file has been reached unexpectedly. The format of the payout file can be found in the appropriate appendix.
ERROR OPENING FILE xxxxxxx
Where xxxxxxx is the name of the file being opened. This indicates that there was an unexpected error opening this machine data file, contact CCL.
M/C AXES INCOMPATIBLE WITH THOSE AVAILABLE
CCL internally configure the post processor for the number and type of axes on the customers winding machine. This error occurs when the post processing option requires axes that the machine does not possess. For example if 5 axis post processing is selected when the machine only has 3 axes.